Universal Electro Cnc Hydraulic Press Brake 7 Axis 600 Ton

Tandem CNC Electro-hydraulic Synchro. Press Brakes CNC Bending machine

Main features of machine,

• Tandem CNC press brake machine realizes bending function by controlling slider stroke and back gauge.

• When using CNC hydraulic press brake, you only need to input the number of the pieces required for bending as well as bending angle for each step, and the CNC press brake machine will finish bending according to the steps you just set in the controller.

• The advanced CNC press brake bending machine mainly adopts a hydro-electric servo system and a grating ruler to form closed-loop control. It features high control accuracy, as well as bending accuracy and repositioning accuracy.

• The Tandem Press brake features a rigid frame for min deflection under the load. The frame steels are made with quality steel improved Q235 using the latest technology.

• Fitted with high-specification CNC controller, the operation of these complex machines is now easier and more intuitive than ever before. Its color, high-resolution touchscreen graphics interface, and powerful CPU enable the most complicated bending operations to be processed effortlessly and sophisticated algorithms to be calculated in mere microseconds, Improve efficiency and output in actual production.

• The worktable adopts DNC controlled mechanical plus convex wedge deflection compensation worktable. After inputting the data of sheet thickness, lower die opening and tensile strength into the NC system, the bending force and the relevance compensation values of worktable and slider will be determined automatically. Therefore, the accurate convex amount can be obtained during each bending. In the process of machining, deflection compensation without blind area can be realized.

• The machine has the ability to resist eccentric bending.

• The machine can tandem combined working, also can separately operating each one.

Machine tool accuracy

1 Geometric accuracy

Positioning accuracy of Y1 and Y2 (ram moving up and down axis) : ± 0.05mm

Repeat positioning accuracy of Y1 and Y2 axes: ± 0.05mm

The positioning accuracy of x-axis: ± 0.10mm

(which is the front and rear moving axis of rear retaining)

X-axis repeated positioning accuracy: ± 0.05mm

2 Working accuracy

Bending angle of test piece: ± 30 '/ M

Bending straightness of test piece: 0.30mm/m

Machine configuration,

• Delem CNC Controller——Netherlands DELEM DA53T,DA58T
• Schneider Electric——France
• WN Main Motor——China
• Estun Servo Motor and Drive——China
• Kacon Foot Switch——South Korea
• Merkel Sealing Ring——Germany
• GIVI Grating Ruler——Italy
• Fagor Grating Ruler——Spain
• EMB Oil Tube Connector——Germany
• Bosch Rexroth Valve Block——Germany
• Nachi Oil Pump——Japan
• HIWIN Ball Screw,Linear Guide Rail,Back-gauge Stopper——Taiwan
• Hydraulic and Electrical Overload Protection
• Mechanical Punching Tool and V Peplaceable Dies

PPED Series Main parameters,

universal hydraulic press brake

600 ton press brake

Cnc Hydraulic Press Brake 7 Axis

Universal Electro Cnc Hydraulic Press Brake 7 Axis 600 Ton Images